Suchergebnisse

Suchergebnisse 1-20 von insgesamt 144.

  • Benutzer-Avatarbild

    Hallo BenGun_, das Weiß ist RAL 9003.

  • Benutzer-Avatarbild

    Hallo Sebastian, mit dem Basic mounting kit und den passenden Adaptern für Deinen Radi (120 oder 140mm) ist das kein Problem. Wir empfehlen für den horizontalen EInbau allerdings, das Multiport top statt des Standard top zu ordern.

  • Benutzer-Avatarbild

    Waterblock for Titan V

    Jakob - - WATERCOOL Support - English

    Beitrag

    Hey Adam, can you specify your concerns against Plexi? We only use true Evonik Plexiglas® (GS). This is not the cheap extruded stuff that is prone to cracking, but the good cast acrylic that can release all internal tensions through hours of gentle cooling. Additionally, we try to reduce the amount of threads into the acrylic to the absolutely necessary minimum, to reduce the possible weak spots for cracks. For example, our terminals do NOT screw into the plexi, but into the metal of the coldpla…

  • Benutzer-Avatarbild

    Waterblock for Titan V

    Jakob - - WATERCOOL Support - English

    Beitrag

    Hey Adam, thanks for your ongoing trust in and love for Heatkiller products! Unfortunately, we are currently not planning to add additional versions to the Titan V lineup. The plexi versions perform just as good when it comes to thermals, so we hope that you might consider them nevertheless...

  • Benutzer-Avatarbild

    "Closed" means that the order was transferred from the shop system to the shipping system and can not be changed by the customer anymore. We are aware that the term is misleading, but unfortunately, it is hardcoded to the software and cannot be changed :// Your order 9031 ships today. You'll receive an automated email with tracking Info from FedEx in the next 12 hours.

  • Benutzer-Avatarbild

    Hey SunnyDays, yes, it is safe to use our waterblock without the backplate. The single small thermal pad on the stock backplate isn't that relevant, since the stock backplate can't dissipate heat very effectively. And when the stock backplate is removed, the component is in contact with fresh air, so all excess heat can dissipate freely. Also, the waterblock on the front offers so much cooling overhead that this small IC should be cooled enough. We do recommend our backplate, nevertheless: it is…

  • Benutzer-Avatarbild

    Hey questors, 1. That inlay is stainless steel. 2. Is it safe: well, stainless steel itself is very robust. You should take good care to not polish the nickel-plated part, though. The nickel layer is ~0,2mm thick, so it can be polished off! 3. A mild metal polish should work, depending on the depth of the scratches. We cannot recommend any product. 4. We can offer you a new inlay for 5,00€, plus shipping to the US 4,95€. If you are interested in that, please send an email to Jakob@watercool.de

  • Benutzer-Avatarbild

    That's what the "PA" in the washer description stands for: Polyamide, commonly known as Nylon I'm sorry, I simply copy&pasted the technical description from our assembly line book

  • Benutzer-Avatarbild

    Hallo PeterleB, Danke für die Anregung! Derzeit ist keine Überarbeitung des Core geplant, aber wir nehmen das für einen möglichen zukünftigen Nachfolger mit auf!

  • Benutzer-Avatarbild

    Hey SunnyDays, I assume you are talking about the plastic washers? You only need all 8 of them if you are installing on a 115X socket without the optional backplate. If you indeed are using socket 115X without the backplate, the correct washer is M4 PA (ad 9mm id 4,3mm x 0,8). You can check if your local hardware store has any, or we can send you a replacement (washer for free, but you would have to carry shipping 3,45€).

  • Benutzer-Avatarbild

    Hey PeterleB, freut uns sehr, dass Dein Umbau gut funktioniert hat, und Danke für das Feedback. Viel Spaß mit Deiner Wasserkühlung!

  • Benutzer-Avatarbild

    Hallo PeterleB, Auf unserer Kompatibilitätsliste führen wir die Karten, die am häufigsten nachgefragt werden bzw die am relevantesten für das "übliche" Wasserkühlungspublikum sind. 1050 Karten werden nur extrem selten mit Wasser gekühlt, daher freut uns Deine spezielle Anfrage um so mehr! Im Core Handbuch auf der letzten Seite findest Du einige technischew Zeichnungen, die Dir hoffentlich helfen können. Diesen ist zum Beispiel zu entnehmen, dass der Lochabstand der Montagelöcher rund um den Sock…

  • Benutzer-Avatarbild

    SILENTstar HD single

    Jakob - - WATERCOOL Support - English

    Beitrag

    Hey Caronen, the SIlentstar single is EOL. We do not produce it anymore at all. It might be that some resellers still have old stock left, as Frozen, but there are no new units coming from us.

  • Benutzer-Avatarbild

    Hey ianpeng, we plan to support a few more custom PCB graphics cards for the next generation. I cannot comment yet on which cards that will be.

  • Benutzer-Avatarbild

    Hello Questors, The linked o-ring set is the o-rings and seals for a Heatkiller IV CPU block. So these are correct for you. we added international letter as shipping option that can be picked during checkout. It is intended for exactly this use-case scenario: small spare parts under 500g. It costs 7,95€ and you should be able to simply pick it during shipping option selection. Please send me a mail to Jakob@watercool.de if it doesn't work.

  • Benutzer-Avatarbild

    Zitat von questors: „For the future, anyone having a problem like this where no matter how the CPU water block is mounted, the same side of the CPU IHS doesn't make good contact with the said water block, check the upper edge of the IHS. I had a 5930K (the actual brand and model isn't the point) where the IHS had a small ridge of material that stuck up above the top of the IHS around one corner. It was very hard to notice unless you know to look for it. I discovered this after my temps were too …

  • Benutzer-Avatarbild

    Hey Superino, thanks for the additional pics. You'd have to pay for shipping to us in the first place. If the block or mounting material is defect, we will send you a new replacement block and reimburse you for the shipping fee, of course!

  • Benutzer-Avatarbild

    Hey Superino, all of this sounds very weird. In 10.000 sold units, we have not had one case like this. Can you please send the block, including the mounting hardware, back to us, so we can investigate it? If the block should be faulty, we will, of course, send you a completely new block as a replacement and carry all shipping costs!

  • Benutzer-Avatarbild

    Hey Superino, is it always the same side of the block? So, when you turn the block, the no-contact areas moves with the block? Or is it always the same side of the motherboard? So when you turn the block, the no-contact area stays consistent with the motherboard?

  • Benutzer-Avatarbild

    Hm. It seems weird. Judging from your pics, the imprint on the IHS looks fine, but the footprint on the coldplate doesn't. - What kind of TIM are you using? How much are you using, and how are you spreading it? - You said that you tried mounting the block in all four different positions, every time with the result of bad contact. Can you identify WHERE the bad contact was? Was it always in the same corner of the CPU socket, or was it always in the same corner of the waterblock?